 |
Sunk without
a trace
Warmfloor Solutions Ltd. discover some
hot favourites which will be an installation
sure bet this winter. Read>> |
Rockwool
& Warmfloor create comfort in SAFETY
The partnership initiative between Rockwool
Ltd. and Warmfloor Solutions is set
to create a comfortable marketing opportunity
for both companies. Warmfloor's new
ComfyFloor heating system relies on
the fire safe insulating properties
of Rockwool. Read>> |
| "
Warmfloor Solutions and Granfix
Adhesives provide a real strength
in partnership to ensure complete peace
of mind when selecting a reliable, safe
and energy efficient electrical underfloor
heating system"
Read>> |
|
|
|
|
|
|
|
With HeatSafe intelligent heating cables, for the first
time, just one cable can be used for all floor warming
applications – whatever the floor surface, its construction,
whether new build or retrofit, and whether for supplementary
(comfort) heating or as a primary single heat source.
|
 |
HeatSafe
Floor Heating System
The HeatSafe self regulating heating cable can be
used with all floor coverings including ceramic
tiled floors, wooden floors, vinyl tiled floors
and even carpeted floors. By installing a self regulating
heating cable, that varies its output relative to
the floor temperature, it is possible to achieve
an even heat distribution without localised overheating.These
products are ideal for wooden floor constructions,
heat sensitive floor coverings or for use with our
ComfyFloor Acoustic Floating Floor. |
|
HeatSafe
Easy to Install
HeatSafe heating cable may be embedded 30 - 50mm
below the surface of the concrete floor slab in,
for example, new build constructions, but more often
is applied to the top of wooden or concrete floors
in both new build and retrofit/renovation constructions. |
 |
|
Why
Choose Self Regulating Cables?
|
- Inherently Safe –
Cannot overheat or burnout!
- Energy Efficient
- Simple to Install
- Cut to length cable
- Simple and Reliable
|
|
| HOW
TO SELECT & INSTALL THE HEATSAFE SYSTEM |
 |
- Measure the area required to be heated allowing
for obstructions such as kitchen units, Bath,WC.
- Select the watts/m2 required from the table
shown.
- Lay fixings provided dependent upon floor
construction (full detailed instructions contained
within each pack).
- Select appropriate position for the controller.
Please note the controller has a switching limit
of 3600 watts, therefore areas requiring multiple
packs will need a contactor supplied and fitted
by a qualified person as the total heating load
exceeds what the controller can switch.
- Lay cable and loop back and forth at the required
pitch.
- For tiled floors cover cable with one layer
of flexible tile adhesive or self levelling
compound.
- Please note that the controller has a
switching limit of 3600 watts, therefore
areas requiring multiple packs will need
a contactor supplied and fitted by a qualified
person if the total heating load exceeds
the switch capacity of the controller.
- We recommend the use of RCCD/MCB protection
with all the underfloor heating systems.
- Insulation -Warmfloor Solutions promotes
energy efficiency.We recommend all floor
bases are installed with suitable insulation.
|
 |
 |
|
| |
| For technical information or assistance with purchasing please call our Help Line on 0845 0603377 |
|
|
Home
